|
|
|
Usuarios conectados
Actualmente hay 6043 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Clock/Timer
2
Press SOURCE or VOLUME +/- to select sound source. � Display sequence shows CD, TUNER. � flashes. Press TIMER to confirm your desired mode. Press VOLUME +/- to set the hours. Press TIMER again. � The clock digits for the minutes flash. Press VOLUME +/- to set the minutes. Press TIMER to confirm the time. � The timer is now set and activated.
3 4 5 6 7
Activating and deactivating TIMER Setting the clock 1
In standby mode or system on, press and hold CLOCK SET on the remote control for more than 3 seconds. � SET CLOCK scrolls on the display. � The clock digits for the hours flash. Press VOLUME +/- to set the hours. Press CLOCK SET again. � The clock digits for the minutes flash. Press VOLUME +/- to set the minutes. Press CLOCK SET to confirm the time. � Press TIMER on the remote to turn off the � If activated, the timer information will display for a few seconds, then the system resumes to the last active source or stays in standby mode. � If deactivated, �OFF� appears. Note: � The system will exit timer setting mode if no button is pressed within 90 seconds.
timer or turn on to the last setting again.
2 3 4 5
Activating and deactivating SLEEP
by itself after a set period of time.
The sleep timer enables the system to switch off � Press SLEEP on the remote control once or more. � Display shows SLEEP and one of the sleep time options in sequence: 90, 75, 60,..., 45,30,15, OFF, 90. if you have selected a time. � To deactivate, press SLEEP on the remote control once or more until OFF is shown, or press STANDBY-ON on the system or remote control. � SLEEP disappears.
Viewing the clock
Press CLOCK SET . � The clock time is displayed.
Setting the timer
� The system can be used as an alarm clock, whereby the CD, TUNER is switched on at a set time. The clock time needs to be set first before the timer can be used. � During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. 1 In standby mode or system on, press and hold TIMER on the remote control for more than 3 seconds. � SET TIMER and SELECT SOURCE scrolls on the display.
15
English
|
|
|
> |
|
