Using your video recorder remote control with your TV set
Your video recorder remote control can transmit several commands to TV sets of different makes. By using the TV buttons on the panel in the middle of the control, you can:
Recording audio only
You can use your video recorder as a HiFi tape recorder. You can record the sound from e.g. a HiFi unit or a second video recorder.
a Switch on the TV set and select the programme number
for the video recorder.
Sq Sr TV y TV m TV q TV r
increase the TV volume reduce the TV volume switch off sound switch off the TV set next programme number previous programme number
b Put a cassette in the machine. c Use an audio cable (cinch cable) to connect your HiFi
(stereo) unit with the video recorder.
AUX IN L R
socket at the back of the
D You can also use the EXT.1 AV 1 or EXT.2 AV 2 sockets or the front L AUDIO R sockets for audio-only recordings.
d Select the programme number from which the �only
a Hold the TV m button and enter the correct remote
control command with the digit buttons 0-9 . You will find a list of all available remote control commands on the last page of this manual. D If the selected code does not work with your TV set, or if the make of your TV is not in the list, you can try out the codes one after the other.
audio� recording should be made, using the ;P or P = button (e.g.: �AUX� for the AUX IN L R socket.
e Press the MENU button. The main menu appears. f Select the line �RECORDING FUNCTIONS� with the
P=
or
;P
button and confirm with the
P
button.
Manual audio control
With the control.
MANUAL
g Select the line �AUDIO ONLY� with the P = or ;P
button and confirm with the button you can switch to manual audio
P
button.
h To start sound recording, press the RECORD/OTR n button. i To stop recording, press the STOP h button. j To end, press the MENU button.
a Press the MANUAL button on the video recorder. The
current selection appears in the display.
b Keep pressing the MANUAL button until �MAN� (manual
audio control) appears in the display.
c With the ;P and P = buttons adjust the recording
level so that the �0 dB� mark lights up during the loudest parts of the recording. D At step b you can switch back to �AUTO.� (automatic audio control) with the MANUAL button.
